Product Description

Mobilgrease MB 2 is a lithium thickened grease for multi purpose applications in commercial and passenger vehicle cars. It is based on mineral oil with a viscosity close to 180 cSt. The product has excellent oxidation stability and very good water resistance. It also offers excellent corrosion protection and good flow properties even at low temperatures.
Mobilgrease MB 2 conforms to Mercedes Benz page 267.

Mobilgrease MB 2 is compatible with seals made of NBR, ACM and FKM, as long as these are suitable for the operating temperatures.

Features and Benefits

Features Advantages and Potential Benefits
Can be used in a wide variety of automotive applications Potential to rationalise products
Long service life Reduced operating costs from lower maintenance costs and economic usage
Good oxidation and thermal stability Good equipment reliability and availability
Excellent protection against rust and corrosion and resistance to water washout Enhanced equipment protection and good lubrication even in presence of water
Good pumpability in centralised systems at low temperatures Optimum reliability
Good mechanical stability even at high shear rate Longer service intervals

Applications

Mobilgrease MB 2 can be used for many automotive applications. It can be used as a single multi purpose grease in fleets, agricultural and construction equipment where MB page 267 specification has been recommended. Mobilgrease MB 2 can also be used in some industrial applications where a non EP grease is suitable. The product has a speed bearing factor of approximately 200,000DmN.

Specifications and Approvals

Mobilgrease MB 2 meets or exceeds the following industry specifications:
DIN 51825: (2004-06) KP2K-30
Mobilgrease MB 2 has the following builder approvals:
MB-Approval 267.0 X
MAN 283 Li-P 2 X

Typical Properties

Mobilgrease MB 2
NLGI Grade 2
Base Oil Viscosity @ 40°C, cSt, ASTM D 445 180
Thickener Type Lithium
Colour Brown
Penetration, Worked×60, 25 ºC, 0.1mm, ASTM D 217
Dropping Point, °C, ASTM D 2265 ›190
4-Ball Weld Load, N, DIN 51350-4 2600
Static oil release (168hrs @ 40°C), % mass, DIN 51817 6.5
Rust protection, Emcor test, rating, ISO 11007 0
Flow pressure test @ -30°C, hPa, DIN 51805 ‹1400

Health and Safety

Based on available information, this product is not expected to produce adverse effects on health when used for the intended application and the recommendations provided in the Material Safety Data Sheet (MSDS) are followed. MSDS’s are available upon request through your sales contract office, or via the Internet. This product should not be used for purposes other than its intended use. If disposing of used product, take care to protect the environment.

Remark

It cannot be guaranteed that the product information given above is up to date. For the latest version of the Product Data Sheet we refer to the product library of ExxonMobil.