Mobil Delvac XHP ESP 10W-40

Den Hartog b.v. » Productbladenoverzicht » Mobil Delvac XHP ESP 10W-40

Mobil Delvac XHP ESP 10W-40

Emission System Protection Diesel Engine Oil

Mobil Delvac XHP ESP 10W-40 is a synthetic extra high performance diesel engine oil engineered to provide lubrication to modern, high performance, low emissions engines used in severe applications. This engine oil is designed using high performance base oils which provide excellent low temperature fluidity, high temperature viscosity retention and volatility control. The new advanced additive system has been expertly engineered to help towards long engine life1 and maintain the efficiency of emission reduction systems including the Diesel Particulate Filter (DPF). Its specifications and approvals allow Mobil Delvac XHP ESP 10W-40 to target mixed fleet applications.

Features and Benefits

High output, low emission engines significantly increase demands on engine lubricants. Tighter engine design, use of inter-coolers, and turbochargers increase thermal stresses on the lubricant. Low emission engine technologies such as higher fuel injection pressure, retarded timing and aftertreatment devices all require improved oil performance in areas such as oxidation stability, soot dispersancy, volatility and compatibility with aftertreatment devices. The advanced technology in Mobil Delvac XHP ESP 10W-40 delivers exceptional performance, long drain interval capability and protection of exhaust systems including those fitted with Diesel Particulate Filters (DPF). The key benefits include:

Features Advantages and Potential Benefits
Outstanding protection against oil thickening, high temperature deposits, sludge build-up and, oil degradation Provides capability for long drain intervals
Helps to protect against ring sticking
Excellent anti-wear, anti-scuff properties and bore polishing and corrosion protection. Helps to towards long engine life1
Stay-in-grade shear stability. Very low volatility Helps to reduce viscosity breakdown and oil consumption under heavy duty, high temperature operating conditions
Low ash, sulfur and phosphorous levels Helps to protect exhaust systems devices like those fitted with DPF
Excellent low temperature properties Helps to improve pumpability and oil circulation

1 Well formulated oils, like Mobil Delvac, that meet or exceed industry or OEM specifications, can help protect engines. Consult OEM for optimum fluid selection. Actual results may vary depending on OEM requirements, type of engine and its maintenance, application and service conditions, and prior lubricant used.

Applications2

  • Heavy Duty Diesel Engines including Euro V/VI Modern Low Emissions Vehicles, Utilizing Technologies such as Diesel Particulate Filter (DPF), Selective Catalytic Reduction (SCR), Continuously Regenerating Traps (CRT), Diesel Oxidation Catalysts (DOC) and Exhaust Gas Recirculation (EGR)
  • Heavy Duty Diesel Engines using low sulfur diesel fuels and many biodiesel fuel formulations
  • Naturally Aspirated and Turbo-Charged Diesel Powered Equipment
  • On-Highway Short-Haul and Long-Haul Trucks and Buses
  • Off-Highway Mining, Construction and Agricultural Equipment

2 Please refer to the owners handbook for OEM application requirements and oil drain intervals for your vehicle or equipment

Specifications and Approvals

Mobil Delvac XHP ESP 10W-40 meets or exceeds the requirements of:
ACEA E9/E7/E6/E4 X
API CJ-4/ CI-4 Plus/ CI-4 X
JASO DH-2 X
DAF Extended Drain X
Cummins CES 20081 X
CAT ECF-3 X
Isuzu DEO (w/DPD Equipped Vehicles) X
Mobil Delvac XHP ESP 10W-40 has the following builder approvals:
Mobil Delvac XHP ESP 10W X
MAN M 3477/ M 3575/ M 3271-1 X
MTU Oil Category 3.1 X
Volvo VDS-4/ VDS-3 X
Renault Truck RLD-3/ RLD-2 X
Deutz DQC IV-10 LA X
Scania Low Ash X
Voith ​Retarder Oil Class B X
Kamaz Euro-3,-4 & -5 engines X
Mobil Delvac XHP ESP 10W-40 is recommended by ExxonMobil for use in applications requiring:
Renault Trucks RXD/ RGD X

Typical Properties

Mobil Delvac XHP ESP 10W-40
SAE Grade 10W-40
Viscosity, ASTM D 445
cSt @ 40ºC 90.6
cSt @ 100ºC 13.6
Viscosity Index, ASTM D 2270 152
Sulfated Ash, wt%, ASTM D 874 1.0
Total Base #, mg KOH/g, ASTM D 2896 13
Pour Point, ºC, ASTM D 97 -36
Flash Point, ºC, ASTM D 92 236
Density @ 15ºC kg/l, ASTM D 4052 0.866

Health and Safety

Based on available information, this product is not expected to produce adverse effects on health when used for the intended application and the recommendations provided in the Material Safety Data Sheet (MSDS) are followed. MSDS’s are available upon request through your sales contract office or via the Internet, or will be provided by seller to customers if and as legally required. This product should not be used for purposes other than its intended use. If disposing of used product, take care to protect the environment.

Remark

It cannot be guaranteed that the product information given above is up to date. For the latest version of the Product Data Sheet we refer to the product library of ExxonMobil.