Product Description

Mobil Delvac XHPTM ESP FE 5W-30 is an extra high performance diesel engine oil engineered to provide outstanding protection and fuel economy potential* in modern, high performance, low emission engines used in severe on-highway applications.

This engine oil is specifically designed to meet the latest Volvo, Daimler, Detroit, Mack, Renault, and Cummins requirements for their newest diesel engines.

This engine oil is formulated with high quality base oils which provide excellent low temperature fluidity, high temperature viscosity retention, volatility control. The base oils, the additive system, and the lowered film viscosity (HT/HS) contribute to fuel economy improvement potential. The advanced additive system has been expertly engineered to help prolong the life and maintain the efficiency of emission reduction systems such as the Diesel Particulate Filter (DPF).

*The fuel economy potential is based on experience of comparing the 5W-30 with a 10W-40 & 15W-40

Features and Benefits

High output, low emission diesel engines significantly increase demands on engine lubricants. Tighter engine design, use of inter-coolers, and turbochargers increase mechanical and thermal stresses on the lubricant. Low emission engine technologies such as higher fuel injection pressure together with retarded timing and after-treatment devices all require improved oil performance in areas such as oxidation stability, soot dispersancy, volatility and compatibility with after-treatment devices. The advanced technology in Mobil Delvac XHP ESP FE 5W-30 delivers exceptional performance and protection of exhaust systems fitted with Diesel Particulate Filters. The key benefits include:

Features Advantages and Potential Benefits
Excellent protection against oil thickening, oil degradation, high temperature deposits, and sludge build-up Contributes to long oil life consistent with OEM recommended Oil Drain Intervals (ODI)

Helps prevent ring sticking for better engineprotection and efficiency

Excellent protection against wear, scuffing, bore polishing, and corrosion Helps control wear in heavy duty operation,promoting long engine life
Excellent low temperature fluidity Contributes to excellent oil pumpability and circulation allowing operation in cold climate regions

Helps protect against wear during cold engine start-up

Advanced “Low Ash” componentry Helps improve efficiency and extend durability of emission exhaust systems fitted with Diesel Particulate Filters (DPF)
Advanced formulation viscometrics

. SAE 5W-30

. Stay-in-grade shear stability

. Very low volatility

Potentially helps to reduce fuel consumption over higher viscosity grade engine oils without compromising engine durability (potential fuel economy depending on vehicle type and driving conditions)

Helps to control viscosity breakdown and oil consumption under heavy duty, high temperature operating conditions

Applications

Recommended by ExxonMobil for use in:

•  Latest generation Volvo trucks and buses requiring VDS-5 (D13 Euro 6D engines)

•  Mercedes-Benz trucks and buses requiring MB-Approval 228.61 lubricants

(OM 470 FE1 and OM 471 FE1 engines as well as off-highway application for engines OM

470, OM 471, and OM 473)

•  Renault trucks and buses requiring RLD-5 (DTi 13 Step-D engines)

•  Trucks and buses requiring API FA-4

Specifications and Approvals

This product has the following approvals:
MB-Approval 228.61
VOLVO VDS-5
RENAULT TRUCKS RLD-5
MACK EOS-5
Detroit Detroit Fluids Specification 93K223
This product meets or exceeds the requirements of:
API FA-4
Cummins CES 20087

Properties and Specifications

Property
Grade SAE 5W-30
Specific Gravity, 15.6 C/15.6 C, ASTM D4052 0.84
Kinematic Viscosity @ 100 C, mm2/s, ASTM D445 10
Flash Point, Cleveland Open Cup, °C, ASTM D92 232
Ash, Sulfated, mass%, ASTM D874 1
Noack Volatility, mass%, ASTM D5800 10
Cold-Cranking Simulator, Apparent Viscosity @ -30 C, mPa.s, ASTM D5293 4800
Hi-Temp Hi-Shear Viscosity @ 150 C 1×10(6) sec(-1), mPa.s, ASTM D4683 3,0
Total Base Number, mgKOH/g, ASTM D2896 12.4
Kinematic Viscosity @ 40 C, mm2/s, ASTM D445 56

Health and safety

Health and Safety recommendations for this product can be found on the Material Safety Data Sheet (MSDS) @ http://www.msds.exxonmobil.com/psims/psims.aspx

Remark

It cannot be guaranteed that the product information given above is up to date. For the latest version of the Product Data Sheet we refer to the product library of ExxonMobil.