Product Description

Mobil Delvac 1 SHC 5W-40 is a very high performance, synthetic diesel engine oil that provides excellent lubrication including long drain capability, helping towards long engine life for diesel engines operating in severe applications. The advanced technology behind this product delivers exceptional performance in turbo-charged as well as older naturally aspirated engines. Mobil Delvac 1 SHC 5W-40 is recommended for use in a wide range of heavy-duty applications and operating environments found in trucking, mining, construction, agriculture and marine.

Features and Benefits

Modern high output diesel engines run hotter than older engines which significantly increases the demands on engine lubricants. Current tighter engine designs reduce oil consumption, resulting in less fresh oil makeup to replenish depleted additives. Top piston rings are located higher bringing the oil film closer to the combustion chamber where temperatures increase thermal stress on the lubricant. Mobil Delvac 1 SHC 5W-40 helps to protect the engine under severe operating conditions. It is also fully compatible with conventional mineral oils. The key benefits include:

Features Advantages and Potential Benefits
Excellent thermal and oxidation stability Control of low temperature sludge build-up and high temperature varnish deposits
High TBN Helps towards extended drain intervals with high sulphur fuels
Advanced formulation and viscometrics Maintains viscosity in severe, high temperature service
Excellent low temperature pumpability Easier engine start-up and reduced wear
Good resistance to corrosion Helps towards long life of critical wear surfaces
Long drain capability Helps towards good operating efficiency and lower overall cost
Component compatibility Long gasket and seal life, extended service intervals
Low volatility, excellent wear and bore polishing control Good oil consumption control

Applications

     •  Mobil Delvac 1 SHC 5W-40 is recommended for use in super high perfrmance diesel applications including turbo-charged and naturally aspirated engines designs

     •  These applications include: on-highway engines operating in both high speed/high load and short haul pick-up/delivery; off-highway and marine engines operating in severe low speed/heavy load conditions

     •  Diesel powered equipment from European builders

Specifications and Approvals

This product has the following approvals:
MANM 3277
MTU Oil Category 3
MB-Approval 228.5
This product is recommended for use in applications requiring:
APICE
APICF
VOLVOVDS-2

Properties and Specifications

Property
Grade SAE 5W-40
Ash, Sulfated, mass%, ASTM D874 1.9
Density @ 15 C, kg/l, ASTM D4052 0.859
Flash Point, Cleveland Open Cup, °C, ASTM D92 238
Kinematic Viscosity @ 100 C, mm2/s, ASTM D445 14.2
Kinematic Viscosity @ 40 C, mm2/s, ASTM D445 84
Pour Point, °C, ASTM D97 -45
Total Base Number, mgKOH/g, ASTM D2896 16
Viscosity Index, ASTM D2270 176

Health and safety

Health and Safety recommendations for this product can be found on the Material Safety Data Sheet (MSDS) @ http://www.msds.exxonmobil.com/psims/psims.aspx

Remark

It cannot be guaranteed that the product information given above is up to date. For the latest version of the Product Data Sheet we refer to the product library of ExxonMobil.