Product Description

Mobil Delvac Light Commercial Vehicle E 10W-40 is an engine oil that provides long engine life and excellent engine protection against sludge & wear.

Mobil Delvac Light Commercial Vehicle E 10W-40 provides excellent lubrication of diesel and gasoline engines operating in severe driving conditions typically encountered in city operations. This product is recommended by ExxonMobil for European engines for use in a wide range of traditional light-duty commercial vehicles.

Features and Benefits

Mobil Delvac Light Commercial Vehicle E 10W-40 is formulated from high performance base oils and a superior balanced additive system to provide optimum engine performance in recent diesel and gasoline engines as well as older models. Key benefits include:

Features Advantages and Potential Benefits
Increased thermal and oxidation stability Help to reduced sludge build-up, deposits, and long oil and engine life
Enhanced wear protection Helps towards long component and engine life
Advanced piston deposit control Helps to keep engines clean with reduced maintenance costs and long engine life
Advanced soot handling to control viscosity increase, sludge build up, and filter pressure Helps to enhance engine protection for long engine life
Enhanced low temperature pumpability Fast start up with reduced wear operating in low temperature climates


ExxonMobil recommends Mobil Delvac Light Commercial Vehicle E 10W-40 for demanding driving conditions:

     •  Older engine technologies

     •  Gasoline and Diesel without Diesel Particulate Filters (DPF)

     •  Light trucks and vans

     •  Normal to occasionally severe operating conditions

Always consult your owner’s manual to check recommended viscosity grade and specifications for your particular vehicle.

Specifications and Approvals

This product meets or exceeds the requirements of:
This product has the following builder approvals:
VW501 01
VW505 00
This product is recommended by ExxonMobil for use in applications requiring:
MB-Approval 229.1

Properties and Specifications

Grade SAE 10W-40
Kinematic Viscosity @ 40 C, mm2/s, ASTM D445 95
Kinematic Viscosity @ 100 C, mm2/s, ASTM D445 14.2
Ash, Sulfated, wt%, ASTM D874 1.2
Total Base Number, mgKOH/g, ASTM D2896 8.2
Flash Point, Cleveland Open Cup, °C, ASTM D92 225
Density @ 15 C, kg/l, ASTM D4052 0.87
Pour Point, °C, ASTM D97 -33

Health and safety

Health and Safety recommendations for this product can be found on the Material Safety Data Sheet (MSDS) @


It cannot be guaranteed that the product information given above is up to date. For the latest version of the Product Data Sheet we refer to the product library of ExxonMobil.