Advanced Full Synthetic Motor Oil
Mobil 1 ESP 0W-30 is an advanced full synthetic engine oil designed to help provide exceptional cleaning power, wear protection and overall performance. Mobil 1 ESP 0W-30 has been expertly engineered to help prolong the life and maintain the efficiency of emission systems in both diesel and gasoline powered automobiles. Mobil 1 ESP 0W-30 meets or exceeds the requirements of many leading industry and car manufacturers’ standards required for newer modern diesel and gasoline powered passenger car engines.
Features and Benefits
Mobil 1 ESP 0W-30 is made with a proprietary blend of leading edge components formulated to be fully compatible with the latest Diesel Particulate Filters (DPF’s) and Gasoline Catalytic Converters (CAT’s). Mobil 1 ESP 0W-30 has been designed to help deliver outstanding performance and protection in conjunction with potential fuel economy benefits. Key features and potential benefits include:
|Features||Advantages and Potential Benefits|
|Low Ash Content||Helps to reduce particulate build up in Diesel Particulate Filters|
|Low Sulfur and Phosphorous content||Helps to reduce poisoning of Gasoline Catalytic Converters|
|Active cleaning agents||Helps to reduce deposits and sludge build-up to enable long and clean engine life|
|Outstanding thermal and oxidation stability||Helps to reduce oil aging allowing extended drain interval protection|
|Low oil consumption||Less hydrocarbon pollution|
|Enhanced frictional properties||Potentially aids fuel economy|
|Excellent low temperature capabilities||Quick cold weather starting and ultra-fast protection Helps to extend engine life|
Mobil 1 ESP 0W-30 is recommended for many types of modern automobile engines, especially the high-performance gasoline and diesel engines found in the latest passenger cars, SUVs and light vans.
Mobil 1 ESP 0W-30 is especially suitable for extreme conditions, where conventional oil often may not perform. It is not recommended for 2-Cycle or aviation engines, unless specifically approved by the manufacturer.
Specifications and Approvals
|Mobil 1 ESP 0W-30 meets or exceeds the requirements of:|
|ACEA C2, C3||X|
|Mobil 1 ESP 0W-30 has the following builder approvals:|
|VW 504 00 / 507 00||X|
|Mobil 1 ESP 0W-30|
|Viscosity, ASTM D 445|
|cSt @ 40ºC||67.8|
|cSt @ 100ºC||12.2|
|Sulfated Ash, wt%, ASTM D 874||0.6|
|Density @15ºC kg/l, ASTM D 4052||0.846|
|Total Base Number (TBN) ASTM D 2896||6.3|
|MRV at -30ºC||26900|
|HTHS Viscosity, mPa•s @150ºC, ASTM D 4683||3.5|
Health and Safety
Based on available information, this product is not expected to produce adverse effects on health when used for the intended application and the recommendations provided in the Material Safety Data Sheet (MSDS) are followed. MSDS’s are available upon request through your sales contract office, or via the Internet. This product should not be used for purposes other than its intended use. If disposing of used product, take care to protect the environment.
It cannot be guaranteed that the product information given above is up to date. For the latest version of the Product Data Sheet we refer to the product library of ExxonMobil.